Specifications
ABES Speed Bump 1.825 is made from stable polypropylene, with three red reflectors integrated on both sides. Designed to be bolted into the ground, and driven over at 20 km/h.
Flexible system of middle sections and end pieces
– Comprising middle sections and end pieces that can be screwed to the gound.
– Low-cost solution to slow down traffic.
– The particular combination of height and width allows the constuction to be passed over with a speed of 20 km/h.
Example
(sample illustration)
Material and Design
– yellow stable polypropylene (PP).
– modular system with linkable parts (middle sections & end fittings).
– middle and end section availabe in black or yellow.
– three red reflectors integrated on both sides (middle section).
– 4 screwholes, without fastener (see ABES Accessory 1.827).
Designed for 20 km/h zones.
Benefits
– easy assembly.
– low costs.
– solid, fully recycable.
– modular system.
Dimensions
Middle section | End piece |
Height: 40 mm Width: 300 mm Length: 333 mm Weight: 1,3 kg | Height: 40 mm Width: 300 mm Length: 100 mm Weight: 0,26 kg |
Order Information
Art. Nr° 1.825.100 (middle section, yellow)
Art. Nr° 1.825.200 (middle section, black)
Art. Nr° 1.825.300 (end fitting, yellow)
Art. Nr° 1.825.400 (end fitting, balck)
Fastening Materials
Art. Nr° 1.827.001 (Speed bump fastener)
Get to know our products and clarify technical questions quickly and easily in a video call with us!
make an appointmentParc d’Activité Syrdall 48, rue Gabriel Lippmann L-6947 Niederanven FON +352.28 67 65 01 FAX +352.28 67 65 20 shop@abes-online.com