The new multi-flange fastening system has all the 3p-Technology Classic advantages, but does not require a ground shell. Instead, there is a connecting flange that is screwed onto a pad foundation. As the multi-flange fastening is based on the same functional principle as the 3p-Technology Classic, you also benefit from the accustomed advantages(see 3p-Technologie).
Can be used with Hex-, Triangular- and ABES Teardrop-Screws.
Steel S235. Yields under increased pressure load.
Mounting material included: M12 threaded socket, M12 screw and washer.
Installation recommendation: Insert M12 threaded socket into concrete foundation to a depth of at least 100 mm using 2C injection mortar (must be selected on site to match substrate).
Place 3p connecting flange on top at ground level and tighten with M12 screw.
All ABES-Bollards with 3p-Technology are compatible with the 3p-Multiflanch and can be mounted without a ground shell