back
  • Bench 100 RP Remaining Stock:1

    15% Price reduction
    «THE ORIGINAL DESIGN»
    Park bench with back rest made from 140 mm wide steel profiles to hold the wooden slats. The profiles are bent and closed at the footing. The wooden slats align with the frames.

    Measurements:

    Width: 1700 mm
    Total height: 740 mm
    Total depth: 760 mm
    Seat height: 420 mm
    Weight: approx. 79 kg

  • Bicycle-Stand 453 RP Remaining Stock:10

    15% Price reduction
    U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge.

  • Bicycle-Stand 453 SP Remaining Stock:10

    15% Price reduction
    with transverse spar
    U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge.

  • Planter 710
    Planter 710 rp Remaining Stock:1

    <strong>15% Price reduction</strong>

    Plant pot with curved sides that taper at both ends. The base has apertures which may be sealed with a perforated plate cover. The container stands on rectangular tubes which serve as supports for hoisting equipment. The apertures of the tubes can be covered with removable caps.

    Measurements:

    Width: 691mm – 801 mm (widest point)
    Length: 1200 mm – 2000 mm
    Height of side wall: 390 mm – 490 mm
    Height of container, incl. base: 500 mm – 600 mm
    Volume: approx. 210 L – 450 L
    Weight when empty: approx. 65 kg -87 kg

  • Planter 720
    Planter 720 RP Remaining Stock:1

    15% Price reduction
    Plant pot with square or oblong basic shape and vertical side walls. Openings are countersunk in the base and closed with a perforated sheet metal cover. The container stands on four individual feet made from square tubes. – Measurements (L x W x H in mm): 800 x 800 x 800.

  • Waste-Container 524
    Waste-Container 524 rp Remaining Stock:1

    Reduced price 15%
    RAL 7035

    Cylindrical waste container covered with a lid and holding a capacity of approx. 40 l, affixed to a circular post. A triangular lock must be opened to to empty the container.

    Measurements:

    Capacity: approx. 40 l
    Height above ground: 1100 mm
    Container diameter: 385 mm
    Diameter of round post: 60,3 x 1,5 mm
    Weight: approx. 9 kg

  • Tree-Guard 662 - RP Remaining Stock:1

    15% Price reduction
    A bent, U-shaped steel frame with a diameter of 48.3 x 2.6 mm. Three foundations are required.
    Optional: a ground shell for the removable model

  • Bench 103 – RP Remaining Stock:1

    Park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood.

  • Fahrradparker aus gebogenem Stahlrohr mit Bodenabschlussplatte
    Bicycle-Stand 450-1 – polished Remaining Stock:1

    Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required.
    With convex cover plate with a 300 mm diameter. · Stainless steel 1.4301 pickled and  electropolished (high-gloss).

  • Bollard 001 – grey/red Remaining Stock:8

    Cylindrical bollard with ten circumferential grooves and a conical base.

    Powder coating in GREY-RED