back

Guide barriers and guide curbs

  • ABES Leitschwelle 1.820
    Guide Barrier 1.820 Guide Barrier H: 1170  Ø: 50

    Yellow guide barrier with red reflective strips, to be bolted into the ground. Robust polypropylene.

    Measurements:

    Height: 1170 mm
    Width: 150 mm
    Depth: 50 mm
    Weight: 2,4 kg

  • guide barrier 1.908
    Guide Curb 1.908 Guide Barrier (yellow)

    BASt certified guide curb system with coupling hooks consisting of antislip centerpieces, endpieces and accessories. The pieces are available in either yellow or white coated recycling-material. An impacting tire first glides over a sloped shape, then to a second, rounded tier for the remaining height. In various tests and real impacts, this design proved to be driver friendly. Tire climb, level, climb again and simultaneously press the separator firmly on the roadway, thus minimizing dislocation. Skid resistant grips on the bottom of each one-meter separator raise the separator slightly above pavement surface so that water can run underneath. No gluing or fastening screws are required.

    Measurements:

    Dimensions centerpiece:
    Length: 1000 mm
    Height: 90 mm
    Width: 270 mm
    Weight: 16 kg

     

    Dimensions endpiece A:
    Length: 440 mm
    Height: 90 mm
    Width: 270 mm
    Weight: 5,6 kg

     

    Dimensions endpiece B:
    Length: 480 mm
    Height: 90 mm
    Width: 270 mm
    Weight: 5,3 kg

  • guide barrier 1.909
    Guide Curb 1.909 Guide Barrier (white)

    BASt certified guide curb system with coupling hooks consisting of antislip centerpieces, endpieces and accessories. The pieces are available in either yellow or white coated recycling-material. An impacting tire first glides over a sloped shape, then to a second, rounded tier for the remaining height. In various tests and real impacts, this design proved to be driver friendly. Tire climb, level, climb again and simultaneously press the separator firmly on the roadway, thus minimizing dislocation. Skid resistant grips on the bottom of each one-meter separator raise the separator slightly above pavement surface so that water can run underneath. No gluing or fastening screws are required.

    Measurements:

    Dimensions centerpiece:
    Length: 1000 mm
    Height: 90 mm
    Width: 270 mm
    Weight: 16 kg

     

    Dimensions endpiece A:
    Length: 440 mm
    Height: 90 mm
    Width: 270 mm
    Weight: 5,6 kg

     

    Dimensions endpiece B:
    Length: 480 mm
    Height: 90 mm
    Width: 270 mm
    Weight: 5,3 kg

  • Little Guiding Beacon 1.910 for Guide Barrier 1.908/1.909 H: 155  Ø: 0

    BASt certified accessory für ABES Guide Curb 1.908 and ABES Guide Curb 1.909. Made from flexible, high impact resistant, orange tinted plastic (PP) with a double-walled flex boot and a handle on the top. Sheeting type 2 HIG, keep left / right. Designed to be attached to the Guide Curb’s designated slots. Detachable and replaceable, restores to upright position, if struck by a vehicle.

    Measurements:

    Height: 60 mm
    Width: 155 mm
    Weight: 1 kg

  • Reflector 1.908
    Reflector 1.908 for Guide Curb 1.908 Accessory H: 180  Ø: 90

    Reflector 1.908 is a BASt certified accessory  for ABES Guide Curb 1.908. Made from yellow tinted plastic. Arch-shaped with 14 cat’s eye reflectors, 7 per side (front / back). Designed to be attached to the Guide Curb’s designated slots. The arch-shaped form perfectly adapts the outline of the guide curb to ensure best visibility at night.

    Measurements:

    Length: 180 mm
    Height: 90 mm
    Width: 56 mm
    Weight: 0,15 kg

  • Reflector 1.909
    Reflector 1.909 for Guide Curb 1.909 Accessory H: 180  Ø: 90

    Reflector 1.909 is a BASt certified accessory  for ABES Guide Curb 1.909. Made from white tinted plastic. Arch-shaped with 14 cat’s eye reflectors, 7 per side (front / back). Designed to be attached to the Guide Curb’s designated slots. The arch-shaped form perfectly adapts the outline of the guide curb to ensure best visibility at night.

    Measurements:

    Length: 180 mm
    Height: 90 mm
    Width: 56 mm
    Weight: 0,15 kg