back

Tables in different Sizes and Designs

  • Rest Furniture 145
    Rest Furniture 145 Park stool and table

    Stool/table consisting of a revolving square steel frame sitting  on a steel profile and into which four/six wooden slats are set flush.

    Measurements:
    STOOL
    Length: 401 mm
    Width: 401 mm
    Seat width: 342 mm
    Height above ground: 453 mm
    Weight: approx. 9 kg
    Rest Furniture 145
    TABLE
    Length: 574 mm
    Width: 574 mm
    Height above ground: 750 mm
    Weight: approx. 12 kg
    Rest Furniture 145

     

     

  • Table 143
    Table 143 Park Table

    Table consisting of two perpendicular side parts made from steel profiles and a rectangular steel frame into which eight wooden slats are set flush. The lower areas of the side parts are stabilised lengthways and diagonally by supports.

    Measurements:

    Lenght: 1587 mm
    Width: 735 mm
    Height above ground: 750 mm
    Weight: approx. 31 kg

  • Table 144
    Table 144 Park Table

    Table consisting of two perpendicular side parts made from steel profiles and a rectangular steel frame into which eight wooden slats are set flush. The lower areas of the side parts are stabilised lengthways and diagonally by supports.

    Measurements:

    Lenght: 1587 mm
    Width: 735 mm
    Height above ground: 750 mm
    Weight: approx. 31 kg

  • Table 1.101-2
    Table 1.101-2 Park Table H: 1600  Ø: 735

    Table, prepared for screw fixing. Base construction is a convex grid with 7 and 10 mm thick ST37 steel. Seat and back rest, pillars and side parts made of round ST37 steel frame (ø 35 mm). Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1600 mm
    Height above ground: 735 mm
    Depth: 690 mm
    Weight: 34,5 kg

  • Table 1.102-1
    Table 1.102-1 Park Table H: 1600  Ø: 835

    Prepared for screw fixing. Senior focused design to facilitate to sit down and to get up. Base construction is a convex grid with 7 and 10 mm thick ST37 steel. Seat and back rest, pillars and side parts made of round ST37 steel frame (ø 35 mm). Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1600 mm
    Height above ground: 835 mm
    Depth: 690 mm
    Weight: 36,5 kg

  • Table 1.103
    Table 1.103 Park Table H: 1960  Ø: 741

    Four-seat table. The base construction is assembled with square tubes (60 x 60 mm round ST37 steel). Galvanized and powder coated in RAL color. The surface is holding 12 Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1960 mm
    Height above ground: 741 mm
    Depth: 672 mm
    Weight: 55 kg (for screw fixing) / 61 kg (for concrete embedment)

  • Table 1.109-2
    Table 1.109-2 Park Table H: 1470  Ø: 780

    Three-seat Table 109  with 2 x 2 feets (ø 35 mm). The Frame is made of flat ST37 steel and integrate laser cutted shapes of ST37 steel. Surface is made of ST37 steel grid with 4, 5 and 6 mm strength. Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1470 mm
    Height above ground: 780 mm
    Depth: 740 mm
    Weight: 38 kg