back

Benches in different Sizes and Designs

  • Bench 100
    Bench 100 Park bench

    «THE ORIGINAL DESIGN»

    Park bench with back rest made from 140 mm wide steel profiles to hold the wooden slats. The profiles are bent and closed at the footing. The wooden slats align with the frames.

    Measurements:

    Width: 1700 mm
    Total height: 740 mm
    Total depth: 760 mm
    Seat height: 420 mm
    Weight: approx. 79 kg

  • Bench 103
    Bench 103 Park bench

    Park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood.

    Measurements:

    Total width: 2380 mm
    Total depth: 730 mm
    Seat height: 430 mm
    Total height: 835 mm
    Weight: approx. 62,5 kg

  • Bench 104
    Bench 104 Park bench

    Cast aluminium bench system without back rest, consisting of four basic units. The system has a modular construction.

    Measurements:

    Width of straight seating unit: 970 mm
    Width of straigh seating unit bent 45°: 1054 mm
    Total depth of element: 420 mm
    Seat height: 452 mm
    Weight of seating element: approx. 10 kg
    Weight of leg: approx. 4 kg
    Diameter full circle 90°: interior 550 mm, exterior: 1390 mm
    Diameter full circle 45°: interior 1950 mm, exterior: 2790 mm

  • Bench 107-1
    Bench 107-1 Park bench

    Park bench without back rest, consisting of two U-shaped steel tube frames including mounting options for a seating slat made from several steel tube profiles. Optionally includes a back rest connected to the rear tube of the seating slat on sickle-shaped suspensions.

    Measurements:

    Total width: 1585 mm
    Seat depth: 340 mm
    Seat height: 437 mm
    Height without back rest: 576 mm

  • Bench 107-2
    Bench 107-2 Park bench

    Park bench with back rest, consisting of two U-shaped steel tube frames including mounting options for a seating slat made from several steel tube profiles. Back rest connected to the rear tube of the seating slat on sickle-shaped suspensions.

    Measurements:

    Total width: 1585 mm
    Seat depth: 340 mm
    Seat height: 437 mm
    Height with back rest: 840 mm
    Total depth with back rest: 522 mm

  • Bench 121
    Bench 121-1 Park bench

    Bench system without back rest, made from two conical cast aluminium bollards with a diameter of 220 mm at the base. The upper end serves to support 14 seat strips. Each bench bollard has a groove all around the top to distinguish the bollards from the seat support.

    Measurements:

    Total width: 2060 mm
    Depth: 340 mm
    Seat height: 458 mm
    Weight of the bench bollard: approx. 17 kg
    Weight: approx. 48 kg (fixed mounting + 3 kg)

  • Bench 121-2
    Bench 121-2 Park bench

    Bench system with back rest, consisting of two conical cast aluminium bollards with a diameter of 220 mm at the base. The bollard head supports steel or stainless steel tubes. Each bench bollard has a circular groove separating the bollard from the head section. The back rest is connected to the rear tube of the seat support on sickle-shaped suspensions.

    Measurements:

    Total width: 2060 mm
    Total height: 820 mm
    Total depth with back rest: 528 mm
    Seat height: 458 mm
    Weight of bench bollard: approx. 17 kg
    Weight: approx. 61 kg (fixed mounting + 3 kg)

  • Bench 131 Park bench

    Bench system without back rest, made from at least two conical cast aluminium bollards with a diameter of 220 mm at the base. The upper end serves to support three seating slats. Each bench bollard has a groove all around the top to distinguish the bollards from the seat support.

    Measurements:

    Width: 1500 mm
    Depth: 340 mm
    Seat height: 450 mm
    Weight of the bench bollard: approx. 17 kg
    Weight: approx. 48 kg (fixed mounting + 3 kg)

  • Bench 141-1 Park bench

    Park bench without back rest, consisting of two semi-circular steel side parts capable of holding five wooden slats ending level with the steel frames.

    Measurements:

    Total width: 2240 mm
    Height: 453 mm
    Depth: 430 mm
    Weight: approx. 22 kg

  • Bench 141-2 Park bench

    Park bench with back rest, consisting of two semi-circular steel side parts capable of holding five wooden slats ending level with the steel frames. Back rest consisting of three wooden slats connected to steel girder.

    Measurements:

    Total width: 2240 mm
    Height with back rest: 823 mm
    Total depth with back rest: 537 mm
    Seat height: 453 mm
    Weight: approx. 27 kg

  • Bench 142-1
    Bench 142-1 Park bench

    Park bench without back rest, consisting of two steel side parts bent outwards at the top, capable of holding five wooden slats. The side parts are higher than the seating slats and serve as armrests.

    Measurements:

    STOOL

    Total width: 722 mm
    Height: 453 mm
    Depth: 440 mm
    Weight: approx. 16 kg

     

    BENCH

    Total width: 2002 mm
    Height: 453 mm
    Depth: 440 mm
    Weight: approx. 22 kg

  • Bench 142-2 Park bench

    Park bench with back rest, consisting of two steel side parts bent outwards at the top, capable of holding five wooden slats. The side parts are higher than the seating slats and serve as armrests. Back rest consisting of three wooden slats connected to steel girders.

    Measurements:

    STOOL
    Total width: 722 mm
    Height: 821 mm
    Depth: 542 mm
    Weight: approx. 20 kg

     

    BENCH
    Total width: 2002 mm
    Height: 821 mm
    Depth: 542 mm
    Seat height: 453 mm
    Weight: approx. 27 kg

  • Bench 143-1
    Bench 143-1 Park bench

    Park bench without back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats.

    Measurements:

    STOOL
    Total width: 610 mm
    Chair without b. r. approx. 13 kg

    BENCH
    Total width: 1890 / 1590 mm
    Total depth : 444 mm
    Seat height: 453 mm
    Weight: approx. 18 kg

  • Bench 143-2 Park bench

    Park chair with back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats. Back rest consisting of three wooden slats connected to steel girders.

    Measurements:

    STOOL
    Total width: 610 mm
    Chair with b. r. approx. 16 kg

    BENCH
    Total width: 1890 / 1590 mm
    Height above ground incl. back rest: 823 mm
    Total depth with back rest: 544 mm
    Seat height: 453 mm
    Weight: approx. 23 kg

  • Bench 144-1 Park bench

    Park bench without back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats.

    Measurements:

    Total width: 1587 mm
    Height above ground: 453 mm
    Depth: 400 mm
    Seat height: 453 mm
    Weight: approx. 18 kg

  • Bench 144-2 Park bench

    Park bench with back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats. Back rest consisting of three wooden slats connected to steel girders.

    Measurements:

    Total width: 1587 mm
    Height above ground: 813 mm
    Depth: 544 mm
    Seat height: 453 mm
    Weight: approx. 23 kg

  • Lean-On-Bench 108
    Lean-On-Bench 108 Lean-On-Bench

    Back to top widening lean-on element with a curved profile. The upper half is equipped with a wooden covering.

    Measurements:

    Height: 1250 mm
    Width above: 740 mm
    Width below: 460 mm
    Depth: 300 mm
    Weight: approx. 105 kg

  • Rest Furniture 145
    Rest Furniture 145 Park stool and table

    Stool/table consisting of a revolving square steel frame sitting  on a steel profile and into which four/six wooden slats are set flush.

    Measurements:
    STOOL
    Length: 401 mm
    Width: 401 mm
    Seat width: 342 mm
    Height above ground: 453 mm
    Weight: approx. 9 kg
    Rest Furniture 145
    TABLE
    Length: 574 mm
    Width: 574 mm
    Height above ground: 750 mm
    Weight: approx. 12 kg
    Rest Furniture 145

     

     

  • Seating-Bollard 105
    Seating-Bollard 105 Seating Bollard

    One-piece seat bollard made from cast aluminium with small diamond-shaped apertures in the circular seat supported by a cylindrical leg, tapering slightly at the base.

    Measurements:

    Seat height: 450 mm
    Diameter: 350 mm
    Plinth diameter: 120 mm
    Weight: approx. 8 kg
    Height ground shell: 300 mm or 500 mm

  • Bench 1.101-1
    Bench 1.101-1 Park bench H: 1600  Ø: 445

    Three-seat park bench without back rest, without arm rest, prepared for screw fixing. Base construction is a convex grid with 7 and 10 mm thick ST37 steel. Seat and back rest, pillars and side parts made of round ST37 steel frame (ø 35 mm). Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1600 mm
    Height above ground: 445 mm
    Depth: 440 mm
    Seating Height: 445 mm
    Seating Depth: 440 mm
    Weight: 21 kg

  • Bench 1.102
    Bench 1.102 Park bench H: 1600  Ø: 915

    Three-seat park bench with back, arm and foot rests, prepared for screw fixing. Senior focused design to facilitate to sit down and to get up. Base construction is a convex grid with 7 and 10 mm thick ST37 steel. Seat and back rest, pillars and side parts made of round ST37 steel frame (ø 35 mm). Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1600 mm
    Height above ground: 915 mm
    Depth: 580 mm
    Seating Height: 500 mm
    Seating Depth: 440 mm
    Weight: 43 kg

  • Bench 1.103-2
    Bench 1.103-2 Park bench H: 1960  Ø: 456

    Four-seat park bench without back rest, without arm rest. The base construction is assembled with square tubes (60 x 60 mm round ST37 steel). Galvanized and powder coated in RAL color. The surface is holding 7 Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1960 mm
    Height above ground: 456 mm
    Depth: 380 mm
    Seating Height: 456 mm
    Seating Depth: 380 mm
    Weight: 42 kg (for screw fixing) bzw. 48 kg (for concrete embedment)

  • Bench 1.103-3
    Bench 1.103-3 Park bench H: 1960  Ø: 900

    Four-seat park bench with back rest, without arm rest. The base construction is assembled with square tubes (60 x 60 mm round ST37 steel). Galvanized and powder coated in RAL color. The surface is holding 7 Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1960 mm
    Height above ground: 900 mm
    Depth: 390 mm
    Seating Height: 456 mm
    Seating Depth: 380 mm
    Weight: 60 kg (screw fixing) / 66 kg (concrete embedment)

  • Bench 104
    Bench 1.104 Park bench H: 1870  Ø: 825

    Four-seat park bench with back rest, with arm rest, prepared for screw fixing. The base construction is Z- shaped and made of ST37 steel. Galvanized and powder coated in RAL color. The surface is holding 7 Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1870 mm
    Height above ground: 825 mm
    Depth: 680 mm
    Seating Height: 455 mm
    Seating Depth: 460 mm
    Weight: 64 kg

  • Bench 1.105
    Bench 1.105 Park bench H: 1930  Ø: 860

    Four-seat park bench with back rest, with arm rest, prepared for screw fixing. The base construction is made of ST37 steel. Galvanized and powder coated in RAL color. The surface is holding Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1930 mm
    Height above ground: 860 mm
    Depth: 540 mm
    Seating Height: 450 mm
    Seating Depth: 460 mm
    Weight: 51 kg

  • Bench 1.106
    Bench 1.106 Park bench H: 1930  Ø: 930

    Three-seat park bench with back, arm and foot rests, prepared for screw fixing. Senior focused design to facilitate to sit down and to get up. The base construction is made of ST37 steel. Galvanized and powder coated in RAL color. The surface is holding Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1930 mm
    Height above ground: 930 mm
    Depth: 600 mm
    Seating Height: 520 mm
    Seating Depth: 460 mm
    Weight: 56 kg

  • Bench 1.107
    Bench 1.107 Park bench H: 1930  Ø: 760

    Four-seat park bench with back rest, with arm rest, prepared for screw fixing. Upper and lower frames are made of rounded ST37 steel (ø 45 mm). Seat and back rest, pillars and side parts made of ST37 steel grid with 4, 5 and 6 mm strength. The upper wires are aligned cross towards the seat-direction. Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1930 mm
    Height above ground: 760 mm
    Depth: 520 mm
    Seating Height: 450 mm
    Seating Depth: 450 mm
    Weight: 50 kg

  • Bench 1.107-1
    Bench 1.107-1 Park bench H: 1930  Ø: 760

    Four-seat park bench with back rest, with arm rest, prepared for screw fixing. Upper and lower frames are made of rounded ST37 steel(ø 45 mm). Galvanized and powder coated in RAL color. Seat and back rest surfaces are holding 30 mm Teakwood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1930 mm
    Height above ground: 760 mm
    Depth: 520 mm
    Seating Height: 450 mm
    Seating Depth: 450 mm
    Weight: 50 kg

  • Bench 1.108
    Bench 1.108 Park bench H: 1930  Ø: 760

    Four-seat park bench with back and arm rests, prepared for screw fixing. Senior focused design to facilitate to sit down and to get up. Upper and lower frames are made of rounded ST37 steel (ø 45 mm). Seat and back rest, pillars and side parts made of ST37 steel grid with 4, 5 and 6 mm strength. The upper wires are aligned cross towards the seat-direction. Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1930 mm
    Height above ground: 760 mm
    Depth: 520 mm
    Seating Height: 450 mm
    Seating Depth: 460 mm
    Weight: 52 kg

  • Bench 1.109
    Bench 1.109 Park bench H: 1470  Ø: 820

    Three-seat park bench with back rest, without arm rests with 2 x 2 feets (ø 35 mm). The Frame is made of flat ST37 steel and integrate laser cutted shapes of ST37 steel. Fluent seat and back rest surface is made of ST37 steel grid with 4, 5 and 6 mm strength. Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1470 mm
    Height above ground: 820 mm
    Depth: 520 mm
    Seating Height: 455 mm
    Seating Depth: 480 mm
    Weight: 37 kg

  • Bench 1.109-1
    Bench 1.109-1 Park bench H: 1470  Ø: 455

    Three-seat park bench without back rest, without arm rest and with 2 x 2 feets (ø 35 mm). The Frame is made of flat ST37 steel and integrate laser cutted shapes of ST37 steel. Seat surface is made of ST37 steel grid with 4, 5 and 6 mm strength. Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1470 mm
    Height above ground: 455 mm
    Depth: 520 mm
    Seating Height: 455 mm
    Seating Depth: 520 mm
    Weight: 28,5 kg

  • Bench 1.110
    Bench 1.110 Park bench H: 578  Ø: 965

    Senior focused single-seat park bench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 578 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 450 mm
    Weight: 40 kg

  • Bench 1.110-1
    Bench 1.110-1 Park bench H: 1150  Ø: 965

    Senior focused two-seat park bench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1150 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 450 mm
    Weight: 75 kg

  • Bench 1.110-2
    Bench 1.110-2 Park bench H: 1267  Ø: 965

    Senior focused single-seat parkbench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. Possibility to integrate one walking frame as a seat. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1267 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 450 mm
    Weight: 55 kg

  • Bench 1.110-3
    Bench 1.110-3 Park bench H: 1828  Ø: 965

    Senior focused three-seat park bench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1828 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 540 mm
    Weight: 110 kg

  • Bench 1.110-4
    Bench 1.110-4 Park bench H: 1945  Ø: 965

    Senior focused two-seat park bench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. Possibility to integrate one walking frame as a seat. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 1945 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 540 mm
    Weight: 145 kg

  • Bench 1.110-5
    Bench 1.110-5 Park bench H: 2400  Ø: 965

    Senior focused four-seat park bench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 2400 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 540 mm
    Weight: 145 kg

  • Bench 1.110-6
    Bench 1.110-6 Park bench H: 2517  Ø: 965

    Senior focused three-seat park bench with back, arm and foot rests, prepared for screw fixing. The height of the Design an a pneumatic spring facilitate to sit down and to get up. Possibility to integrate one walking frame as a seat. The frame is made of ST37 steel (ø 35 mm), galvanized and powder coated in RAL color. Seat and back rest, pillars and side parts have applications of Robinia Wood slats. All screws are made of V2A class steel.

    Measurements:

    Length: 2517 mm
    Height above ground: 965 mm
    Depth: 720 mm
    Seating Height: 560 mm
    Seating Depth: 540 mm
    Weight: 125 kg

  • Bench 1.111
    Bench 1.111 Park bench H: 600  Ø: 915

    Single-seat park bench with back, arm and foot rests, prepared for screw fixing. Senior focused design to facilitate to sit down and to get up. Base construction is a convex grid with 7 and 10 mm thick ST37 steel. Seat and back rest, pillars and side parts made of round ST37 steel frame (ø 35 mm). Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 600 mm
    Height above ground: 915 mm
    Depth: 580 mm
    Seating Height: 500 mm
    Seating Depth: 440 mm
    Weight: 26 kg

  • Bench 1.112
    Bench 1.112 Park bench H: 1200  Ø: 915

    Two-seat park bench with back, arm and foot rests, prepared for screw fixing. Senior focused design to facilitate to sit down and to get up. Base construction is a convex grid with 7 and 10 mm thick ST37 steel. Seat and back rest, pillars and side parts made of round ST37 steel frame (ø 35 mm). Galvanized and powder coated in RAL color. All screws are made of V2A class steel.

    Measurements:

    Length: 1200 mm
    Height above ground: 915 mm
    Depth: 580 mm
    Seating Height: 500 mm
    Seating Depth: 440 mm
    Weight: 35 kg